Skip to content

2. Mainboard Introduction

1. Description:

The Qiguopai ESP32 main control board is a mini development board designed based on the ESP-WROOM-32E module.

Special note: ESP-WROOM-32E is an entry-level module launched by Espressif. Various manufacturers in the industry can design corresponding development boards according to actual needs based on the open-source protocol. Therefore, the text "ESP-32S" marked on the back of the development board is the number of this development board, not the module name.

The module refers to the part on the front of the development board with the metal shielding cover, rather than the entire development board.

The ESP-WROOM-32E module is a WiFi + Bluetooth solution with industry-leading integration, requiring fewer than 10 external components. It integrates an antenna switch, RF balun, power amplifier, low-noise amplifier, filters, and power management modules. At the same time, it also integrates antennas, adopting TSMC's low-power 40nm technology, with excellent power consumption and RF performance, safe and reliable, and easy to expand to various applications.

2. Specifications:

  • Microcontroller: ESP-WROOM-32E module
  • USB-to-serial chip: CP2102-GMR
  • Operating voltage: DC 5V
  • Operating current: 80mA (average)
  • Supply current: 500mA (minimum)
  • Operating temperature range: -40°C ~ +85°C
  • WiFi mode: Station/SoftAP/SoftAP+Station/P2P
  • WiFi protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
  • WiFi frequency range: 2.4 GHz ~ 2.5 GHz
  • Bluetooth protocol: compliant with Bluetooth v4.2 BR/EDR and BLE standards
  • Dimensions: 55mm x 26mm x 13mm
  • Weight: 9.8g

3. Description of each interface and major component:

4. Detailed description of each interface:

  • IO23: VSPI MOSI/SPI MOSI
  • IO22: Wire SCL
  • TXD0: IO1/Serial TX
  • RXD0: IO3/Serial RX
  • IO21: Wire SDA
  • IO19: VSPI MISO/SPI MISO
  • IO18: VSPI SCK/SPI SCK
  • IO5: VSPI SS/SPI SS
  • IO4: ADC10/TOUCH0
  • IO0: ADC11/TOUCH1
  • IO2: ADC12/TOUCH2
  • IO15: HSPI SS/ADC13/TOUCH3/TDO
  • SD1: IO8/FLASH D1
  • SD0: IO7/FLASH D0
  • CLK: IO6/FLASH SCK
  • CMD: IO11/FLASH CMD
  • SD3: IO10/FLASH D3
  • SD2: IO9/FLASH D2
  • IO13: HSPI MOSI/ADC14/TOUCH4/TCK
  • IO12: HSPI MISO/ADC15/TOUCH5/TDI
  • IO14: HSPI SCK/ADC16/TOUCH6/TMS
  • IO27: ADC17/TOUCH7
  • IO26: ADC19/DAC2
  • IO25: ADC18/DAC1
  • IO33: ADC5/TOUCH8
  • IO32: ADC4/TOUCH9
  • IO35: ADC7
  • IO34: ADC6
  • SENSOR VN: IO39/ADC3
  • SENSOR VP: IO36/ADC0
  • EN button: Reset key