2. Board Introduction¶

1. Description:
The Qiguopai ESP32 main control board is a mini development board designed based on the ESP-WROOM-32E module.

Special statement: The ESP-WROOM-32E is an entry-level module launched by Espressif. Manufacturers in the industry can design corresponding development boards according to actual needs based on the open source agreement. Therefore, the "ESP-32S" marked on the back of the development board is the development board's part number, not the module name.
A module refers to the part on the front of the development board with the metal shielding cover, rather than the entire development board.
The ESP-WROOM-32E module is a leading WiFi + Bluetooth solution in the industry with fewer than 10 external components. It integrates an antenna switch, RF balun, power amplifier, low-noise amplifier, filter and power management module. At the same time, it also integrates a low-power 40nm TSMC technology with excellent power consumption performance and RF performance, making it secure, reliable, and easy to expand into various applications.
2. Specifications:
- Microcontroller: ESP-WROOM-32E module
- USB-to-Serial Chip: CP2102-GMR
- Operating Voltage: DC 5V
- Operating Current: 80mA (average)
- Supply Current: 500mA (minimum)
- Operating Temperature Range: -40°C ~ +85°C
- WiFi Mode: Station/SoftAP/SoftAP+Station/P2P
- WiFi Protocol: 802.11 b/g/n/e/i (802.11n, speed up to 150 Mbps
- WiFi Frequency Range: 2.4 GHz ~ 2.5 GHz
- Bluetooth Protocol: compliant with Bluetooth v4.2 BR/EDR and BLE standards
- Dimensions: 55mm x 26mm x 13mm
- Weight: 9.8g
3. Description of each interface and main component:

4. Detailed description of each interface:
- IO23: VSPI MOSI/SPI MOSI
- IO22: Wire SCL
- TXD0: IO1/Serial TX
- RXD0: IO3/Serial RX
- IO21: Wire SDA
- IO19: VSPI MISO/SPI MISO
- IO18: VSPI SCK/SPI SCK
- IO5: VSPI SS/SPI SS
- IO4: ADC10/TOUCH0
- IO0: ADC11/TOUCH1
- IO2: ADC12/TOUCH2
- IO15: HSPI SS/ADC13/TOUCH3/TDO
- SD1: IO8/FLASH D1
- SD0: IO7/FLASH D0
- CLK: IO6/FLASH SCK
- CMD: IO11/FLASH CMD
- SD3: IO10/FLASH D3
- SD2: IO9/FLASH D2
- IO13: HSPI MOSI/ADC14/TOUCH4/TCK
- IO12: HSPI MISO/ADC15/TOUCH5/TDI
- IO14: HSPI SCK/ADC16/TOUCH6/TMS
- IO27: ADC17/TOUCH7
- IO26: ADC19/DAC2
- IO25: ADC18/DAC1
- IO33: ADC5/TOUCH8
- IO32: ADC4/TOUCH9
- IO35: ADC7
- IO34: ADC6
- SENSOR VN: IO39/ADC3
- SENSOR VP: IO36/ADC0
- EN Button: Reset key