Skip to content

2. Main Board Introduction

1. Description:

The Qiguopai ESP32 main control board is a mini development board designed based on the ESP-WROOM-32E module.

Special Statement: The ESP-WROOM-32E is an entry-level module launched by Espressif. Various manufacturers in the industry can design corresponding development boards according to their actual needs based on the open-source agreement. Therefore, the words "ESP-32S" marked on the back of the development board are the model number of the development board, not the module name.

A module refers to the part on the front of the development board with the metal shielding case, rather than the entire development board.

The ESP-WROOM-32E module is an industry-leading WiFi + Bluetooth solution with the highest integration. It has fewer than 10 external components, and it integrates an antenna switch, RF balun, power amplifier, low-noise amplifier, filters, and power management module. At the same time, it also integrates TSMC's low-power 40nm technology, with excellent power consumption performance and RF performance, and is safe, reliable, and easy to expand to various applications.

2. Specifications:

  • Microcontroller: ESP-WROOM-32E module
  • USB-to-Serial Chip: CP2102-GMR
  • Operating Voltage: DC 5V
  • Operating Current: 80mA (average)
  • Supply Current: 500mA (minimum)
  • Operating Temperature Range: -40°C ~ +85°C
  • WiFi Mode: Station/SoftAP/SoftAP+Station/P2P
  • WiFi Protocol: 802.11 b/g/n/e/i (802.11n, up to 150 Mbps
  • WiFi Frequency Range: 2.4 GHz ~ 2.5 GHz
  • Bluetooth Protocol: Compliant with Bluetooth v4.2 BR/EDR and BLE standards
  • Dimensions: 55mm x 26mm x 13mm
  • Weight: 9.8g

3. Description of Each Interface and Main Component:

4. Detailed Description of Each Interface:

  • IO23: VSPI MOSI/SPI MOSI
  • IO22: Wire SCL
  • TXD0: IO1/Serial TX
  • RXD0: IO3/Serial RX
  • IO21: Wire SDA
  • IO19: VSPI MISO/SPI MISO
  • IO18: VSPI SCK/SPI SCK
  • IO5: VSPI SS/SPI SS
  • IO4: ADC10/TOUCH0
  • IO0: ADC11/TOUCH1
  • IO2: ADC12/TOUCH2
  • IO15: HSPI SS/ADC13/TOUCH3/TDO
  • SD1: IO8/FLASH D1
  • SD0: IO7/FLASH D0
  • CLK: IO6/FLASH SCK
  • CMD: IO11/FLASH CMD
  • SD3: IO10/FLASH D3
  • SD2: IO9/FLASH D2
  • IO13: HSPI MOSI/ADC14/TOUCH4/TCK
  • IO12: HSPI MISO/ADC15/TOUCH5/TDI
  • IO14: HSPI SCK/ADC16/TOUCH6/TMS
  • IO27: ADC17/TOUCH7
  • IO26: ADC19/DAC2
  • IO25: ADC18/DAC1
  • IO33: ADC5/TOUCH8
  • IO32: ADC4/TOUCH9
  • IO35: ADC7
  • IO34: ADC6
  • SENSOR VN: IO39/ADC3
  • SENSOR VP: IO36/ADC0
  • EN Button: Reset button